Entryway chandelier – Although individual chandeliers differs from manufacturer to manufacturer, most traditional chandeliers made from the same type of parts usually brass and crystal and have similar silhouettes. This fact makes some generalizations can be made about how to assemble most of the chandeliers. If you took a chandelier home but left their assembly instructions behind or lost them, you can still put together your luminaries without scouring the Internet for the model’s specific instructions. Make changes in the assembly process as you familiarize yourself with your model.
Slide the canopy on the chain. Enter the two electrical wires through the chain passing through the third or fourth link. Thread one end of the wires through the canopy. Feed the other end of the cables through the entryway chandelier base. Attach the wires to the wires inside the base; the wires connecting them to be visibly different from the arm threads, you will thread through the chandelier arms. Twist them if no other connection method appears, and remember to connect like colors. Cover the connections with wire nuts.
Wood entryway chandelier arm wires through the holes in the bottom, one in each hole. Strip 1 inch from the end of any new cables. Wood them by the arms, and then attach the arms to the base. Wrap the ends of the wires around the two screws on the sides of the terminals at the end of the arms; Wrap each wire in the opposite direction from the other thread.
12 How To Mount Entryway Chandelier Photos